High solid content textile coating water-based resin DS-6501
DEMARTAN PG does not contain free formaldehyde, environmental performance in line with EU standards. DEMARTAN PG is very suitable for pre-tanning and re-tanning of leather requiring soft finished leather.
Keywords: High solid content textile coating water-based resin DS-6501
Classification:
Product Description
Product parameters
Appearance: Milky white liquid
Solid content: 50%+2
PH value: 7-9
Viscosity: 100-1000CPS
Ionic type: Anion
Elongation at break: 800-1000%
Product performance
1. Has good flexibility performance;
2. High solid content and fast drying speed;
3. Film forming soft elasticity;
4. After drying or self drying, water-based polyurethane should be tested and evaluated by Shuhua 24 hours later;
Application suggestions
Suitable for UD non-woven fabric, PVC leather and fabric bonding, textile printing coating, nylon fabric, non-woven fabric, knitted fabric printing coating in military enterprises; Preparation of leather middle and top layer coating, leather edge oil resin, and elastic coating. For textile coating printing, it is recommended to mix acrylic lotion with the addition amount of 10% -20%. Adding an appropriate amount of water-based dispersible isocyanate curing agent or aziridine can greatly improve the adhesive strength, hydrolysis resistance, and heat resistance. This product does not contain ethoxyalkylphenols (APEO) or organotin.
Precautions for use
1. Deionized water must be used when diluting lotion. If tap water is used, flocculation and demulsification may occur.
2. When mixing with acid lotion such as VAE, the PH of acid lotion must be adjusted to 7-9;
Storage
Non dangerous goods, antifreeze, ambient temperature of 5 ℃~40 ℃, storage period of 6 months, must be kept in its original condition, sealed, and comply with the requirements of technical parameters. Adequate mixing should be carried out before use
Related Products
Online Message